Overview of the hottest paint market in 2003 0

  • Detail

Summary of coating market in 2003

this year, China's coating production has increased significantly compared with last year. According to statistics, the national coating output from January to September was 1420500 tons, with a year-on-year increase of 10.61%. It is expected that the annual output will exceed 2million tons, jumping to a new level. Among the 18 categories of coatings, alkyd resin paint is the largest product in China, followed by phenolic resin paint. The proportion of high-grade synthetic resin coatings reaches about 70%, and the proportion of energy-saving and low pollution coatings (water-based coatings, powder coatings, high solid content coatings, radiation curing coatings) is about 26%

since the reform and opening-up, township enterprises, private enterprises and foreign capital have rapidly entered the coating industry due to the characteristics of less investment and quick effect in coating production. According to the statistics of the 1995 industrial census, the number of paint production enterprises in China has reached 4544, including 3118 Independent Accounting Enterprises above township level. It is estimated that at present, there are about 8000 coating enterprises in China, mainly concentrated in the Yangtze River Delta and the Pearl River Delta, where the economy is developing rapidly. Among them, the paint production in East China is the largest, accounting for 45% of the total output of the country; Central and southern China accounts for 30%; North China accounts for 15%; The proportion of northeast, southwest and northwest regions is about 10%. Wholly foreign-owned enterprises, joint ventures and domestic large-scale production plants are positioned as medium and high-grade products. Individual and township small enterprises generally produce low-grade products

in order to improve the overall technical level of the coating industry, during the "Eighth Five Year Plan" and "Ninth Five Year Plan", the state organized the development of 63 innovative coating science and technology projects, most of which have been industrialized at present. Its main innovative achievements include thick film cathodic electrodeposition coating, metal flash coating, thick film architectural coating, waterborne industrial coating, waterborne anti-corrosion coating, polyurethane wood paint, weather resistant coiled material coating, marine ship coating, light resistant molybdenum chromium red pigment, pearlescent pigment, etc. China's paint industry has successively introduced and established several sets of automotive paint production devices from Japan, Austria, Germany, the Netherlands, the United States and other countries, which has promoted the improvement of domestic automotive paint production technology. China has also introduced more than 10 latex coating production lines from Japan, France, the United States and other countries, so that the level of latex coating production lines and latex coatings is not lower than that of industrial developed countries at present. In terms of marine coatings, marine coatings and anti-corrosion coatings, Hempel of Denmark, IP of Britain, jotuh of Norway, Earl of Britain and Kansai of Japan have successively invested and set up factories in Shenzhen, Shanghai, Guangzhou, Ningbo and Tianjin. Some well-known foreign additive manufacturers and pigment manufacturers are also looking for opportunities to set up factories in China. The internationalization of the coating market has promoted the technological progress of China's coating industry and shortened the gap between China's medium and high-end coatings and foreign countries

although the production and sales of coatings in China have jumped to the fourth place in the world, the annual consumption per capita is much lower than that in industrialized countries. In the United States, Germany and Japan, whose output ranks among the top three in the world, the per capita annual consumption of coatings has reached 22 kg, 27 kg and 17 kg respectively, with the world average of 4 kg, while China has only 2 kg, so the market development space is very huge

it is estimated that China's paint output will reach 2.2 million tons next year, with an increase rate of about 10%. The general development trend of the market is: total supply exceeds demand, medium and low-grade products are surplus, some high-end products are in short supply, demand shows a multi-level and diversified development trend, and the proportion of special paint is further increased. Next year, the market consumption structure is: industrial coatings account for 35% - 40%, architectural coatings account for 35% - 40%, and the travel range of special XY test bench: 25 × 25mm coating accounts for 10% - 15%

the growth rate of industrial coating market will be about 7% next year. Among them, the production of automobiles, motorcycles, ships, household appliances, etc. has developed rapidly, and it is expected that the demand for coatings will increase by varying degrees. For example, the output of the automotive industry this year can reach 3million vehicles, with a growth rate of more than 33%. It is expected that the production will continue to maintain a high-speed growth next year, and the corresponding growth rate of automotive coatings next year will not be less than 30%

from January to September this year, the output of architectural coatings in China reached 463600 tons, with a year-on-year increase of 14.44%. According to the development plan of the Ministry of construction, 540million square meters of urban residential buildings will be built every year during the "Tenth Five Year Plan", which is 15.1% higher than the average annual construction area of the "Ninth Five Year Plan". It is expected that the demand for architectural coatings will also increase by 14T% - 15% next year. Driven by the Olympic project and the western development, the consumption market of architectural coatings will maintain a high growth rate in the next few years

in terms of specific varieties, the situation of energy-saving and low pollution waterborne coatings, high solid coatings, powder coatings, solvent-free coatings and radiation curing coatings will be promising in the past two years; Coatings with excessive VOC content, toxic lead chromium antirust pigments such as red lead and chrome yellow, and coatings with seriously excessive free isocyanate monomer in polyurethane coatings will be limited in the market; Among architectural coatings, high-grade emulsion paint used for urban interior decoration will be favored, decorative fire-proof coating and floor coating will become rising stars, and low-grade architectural coatings such as polyvinyl alcohol water glass interior wall coating (106), polyvinyl formal coating (107), starch coating, fiber modified starch coating and other products will be further eliminated; Waterproof coatings will be developed in the direction of water-based, elastic, acid and alkali resistance, sound insulation, sealing and cracking resistance, such as silicone rubber waterproof coating, polyurethane waterproof coating, water-based PVC waterproof coating, VAE waterproof coating, neoprene asphalt waterproof coating, etc; Thermal insulation in functional coatings our production mode, business mode and development concept are changing. Coatings, sunscreen coatings, anti mosquito and fly coatings, anti mildew and sterilization coatings and sound insulation coatings will develop rapidly

in terms of import and export, exports are optimistic about China's advantageous phenolic resin coatings and chemically modified natural resin coatings, which can provide significant help for the long-life design of domestic aero-engine turbine disks, and their export destinations are mainly North Korea, Russia, Mongolia, Myanmar, Kazakhstan, Kyrgyzstan and Hong Kong. The main imported varieties are high-grade polyester coatings and acrylate coatings supporting imported production lines

it is reported that the relevant departments of the state will focus on cracking down on counterfeiting in the paint industry next year, and some small workshops of fake famous brand products will withdraw from the market, and marketable famous brand products will have greater development space

Copyright © 2011 JIN SHI